Replaced by BCC+Film Glow
We recommend use of BCC+Film Glow instead of BCC Fast Film Glow. The newer BCC+Film Glow filter generates a traditional film glow look where the frame is subjected to a strong light source causing the image to bloom. The filter also contains GPU acceleration for faster smoother results, and FX Editor support.
Overview
The BCC Fast Film Glow is a 100% GPU accelerated filter which uses OpenCL to deliver the same look and features of the original BCC Film Glow but with dramatically improved performance. BCC Fast Film Glow generates a traditional film glow look where the frame is subjected to a strong light source causing the image to bloom. A common use of the glow filter is to make the whites in an image appear to glow and the filter will do this at its default settings. To generate that flash to white glow, you need only animate the Glow Intensity parameter from 0 to the maximum desired value. The Glow Threshold control is very useful in adjusting which regions or the image will contribute to the glow based on the brightness ranges found in a particular source clip. Setting the Threshold Color value to anything other than white will prevent pixels of the same color value from contributing to the glow.
Parameter Controls
Presets and Common Controls
BCC filters come with a library of factory installed presets plus the ability to create your own custom presets and preview them with the BCC FX Browser™.
BCC filters also include common controls that configure global effect preferences and other host-specific effect settings.
For more information about working with presets and other common controls, Click Here.
Compare Mode
The BCC Compare Mode provides a convenient mechanism to compare the effect result with the original source layer. It provides several variations on basic split-screen views with the filtered clip placed next to the unedited original.
For more information on the Compare Mode,Click Here.
View Popup: This four way pop-up is useful when setting up the filter:
- Output: This is the main result of the full glow effect applied back over the input clip
- Glow: Displays just the generated glow prior to being applied back to the input clip via the apply modes.
- Threshold: Displays the intermediate result of the threshold setting
- Threshold w Boost + Desat: Displays the intermediate result of the Threshold with Boost and Glow Desaturation applied
Glow Intensity: Use to control the intensity of the glow result. Higher values yield a stronger glow with a total white image when this parameter is set to it’s highest value.
Glow Color: Used to set the color of the glow. Default is white.
Glow Radius: Used to set the radius over which the glow spreads to surrounding regions.
X Radius: Independent control for the width of the glow.
Y Radius: Independent control for the height of the glow.
Glow Desaturation: This function alters the glow result by adjusting the chroma values that are used for the input. At 0 the function has no effect on the result generating a traditional film glow, increasing the value in this parameter yields a result that looks colder and less saturated.
Glow Threshold: Used to set the pixel values that are affected by the glow – a setting of 0 will apply a glow to all of the pixels in the input clip, while a setting of 100 will not apply any glow to the image.
Glow From Alpha: The Glow From Alpha option generates the image glow from the alpha channel instead of or in addition to the color channels. The selection in the Glow From Alpha Mode determines how the alpha glow and the color channel glows are combined.
Glow Boost Alpha: Controls how much the spread of glow pixels caused by the blur boosts the alpha channel of non-‐opaque pixels.
RGB Independent Group
RGB Independent: This checkbox enables independent scaling of the glow dimensions for R, G, and B.
Red Scale: Scales red glow uniformly.
Red Scale X: Scales red glow along horizontal axis.
Red Scale Y: Scales red glow along horizontal axis.
Green Scale: Scales green glow uniformly.
Green Scale X: Scales green glow along horizontal axis.
Green Scale Y: Scales green glow along horizontal axis.
Blue Scale: Scales blue glow uniformly.
Blue Scale X: Scales blue glow along horizontal axis.
Blue Scale Y: Scales blue glow along horizontal axis.
Extras Group
Threshold Color: The RGB values of this color are added to the threshold slider value to make an independent threshold for each channel. (e.g. if this is set to pure blue, the blue channel is not glowed, regardless of the channel values or the threshold slider setting.)
Glow Apply Mode: This pop-up is used to set the apply mode that the filter uses to composite the glow over the input image. The default apply mode is “Screen”.
Mix With Original: Used to blend the filter effect back with the unfiltered input image.
PixelChooser
The BCC PixelChooser provides simple, built-in masking of the effect result. The PixelChooser is generally used to select a portion of the image and restrict an effect to just the selected area while maintaining the original image content in unselected regions. The selection can be based on geometric shapes or on the image’s luma/color properties.
For more information on the PixelChooser, Click Here.
Note that when Avoid Clipping is enabled the Pixel Chooser is unavailable in Film Glow.
Beat Reactor
The BCC Beat Reactor is an animation control suite which drives effect properties based on the contents of an audio track. This lets you seamlessly tie visual FX to an audio soundtrack without the need for ANY manual keyframing.
For more information on the Beat Reactor, Click Here.