Sapphire Plug-ins for After Effects: HyperPush

S_HyperPush

Pushes the foreground nearer in z space before dissolving to the background, and featuring some bonus color and shake effects for added style.

In the Sapphire Transitions effects submenu.


Inputs:

Foreground: The current layer. Starts the transition with this clip.

Background: Defaults to None. Ends the transition with this clip. If this input is not provided, a fully transparent background is used, showing whatever is behind it. Note that the background can not be warped during the transition unless this input is provided.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Transition Dir: Popup menu,  Default: Dissolve Off to Bg .
Selects the direction of the transition.
Dissolve Off to Bg: transitions from the current layer to the Background.
Dissolve On from Bg: transitions from the Background to the current layer.

Auto Trans: Popup YES-NO,  Default: No .
If enabled, a transition is performed automatically between the first and last frames of the layer. If this is off, the transition is performed manually by animating the Dissolve Percent parameter.

Dissolve Percent: Default: 0, Range: 0 to 1.
Auto Trans must be disabled for this parameter to be used. It determines the transition ratio between the Foreground and Background inputs, and would normally be animated from 0 to 100 to perform a complete transition. The curve controlling this parameter can be adjusted for more detailed control over the timing of the dissolve. The Slow In and Slow Out parameters, if positive, also adjust the transition ratio internally for a smoother start and/or end to the transition.

Slow In: Default: 1, Range: 0 to 1.
If positive, causes the transition to start more gradually.

Slow Out: Default: 1, Range: 0 to 1.
If positive, causes the transition to end more gradually.

Dissolve Speed: Default: 5, Range: 1 or greater.
The speed of the dissolve between the foreground and background.

Z Dist From: Default: 0.001, Range: 0.001 or greater.
Scales the 'distance' of the foreground. Values greater than 1.0 move it farther away and make it smaller. Values less than 1.0 move the image closer and enlarge it. Zooming in slightly can sometimes be used to hide edge artifacts.

Center XY From: X & Y,   Default: [0 0], Range: any.
The center of the fish-eye warping function, in screen coordinates relative to the center of the foreground.

Rotate From: Default: 0, Range: any.
Rotates the foreground about the center location by this many degrees. The angle ramps up to this value as the transition proceeds.

Wrap From: X & Y,  Popup menu,  Default: [ Reflect Reflect ].
Determines the method for accessing outside the borders of the foreground image.
No: gives black beyond the borders.
Tile: repeats a copy of the image.
Reflect: repeats a mirrored copy. Edges are often less visible with this method.

Z Dist To: Default: 5, Range: 0.001 or greater.
Scales the 'distance' of the background. Values greater than 1.0 move it farther away and make it smaller. Values less than 1.0 move the image closer and enlarge it. Zooming in slightly can sometimes be used to hide edge artifacts.

Center XY To: X & Y,   Default: [0 0], Range: any.
The center of the fish-eye warping function, in screen coordinates relative to the center of the background.

Rotate To: Default: 0, Range: any.
Rotates the background about the center location by this many degrees. The angle ramps up to this value as the transition proceeds.

Wrap To: X & Y,  Popup menu,  Default: [ Reflect Reflect ].
Determines the method for accessing outside the borders of the background image.
No: gives black beyond the borders.
Tile: repeats a copy of the image.
Reflect: repeats a mirrored copy. Edges are often less visible with this method.

Motion Blur: Check-box,  Default: on.
Enables motion blur.

Blur From Z Dist: Default: 0.7, Range: 0.001 or greater.
The 'distance' of the From transformation. Increase to zoom out, decrease to zoom in.

Blur From Rotate: Default: 0, Range: any.
The rotation angle of the From transformation, in degrees, about the center.

Blur To Z Dist: Default: 0.9, Range: 0.001 or greater.
The 'distance' of the To transformation. Increase to zoom out, or decrease to zoom in.

Blur To Rotate: Default: 0, Range: any.
The rotation angle of the To transformation, in degrees, about the center. Note that if the From and To Rotate angles are very different, the interpolation between them will become less accurate.

Camera Shake: Check-box,  Default: off.
Enables camera shake.

Amplitude: Default: 2, Range: 0 or greater.
Scales the amplitude of the shaking motion.

Frequency: Default: 2, Range: 0 or greater.
Increase for faster shaking, decrease for slower shaking.

Glow Brights: Check-box,  Default: on.
Enables glow brights.

Glow Brightness: Default: 3, Range: 0 or greater.
Overall maximum brightness of the glow.

Glow Threshold: Default: 0.2, Range: 0 or greater.
Parts of the source clip that are brighter than this value get glowed. A value of 0.9 makes only the brightest spots glow. A value of 0 makes every non-black area glow.

Glow Width: Default: 0, Range: 0 or greater.
The width of the glow.

Width X: Default: 1, Range: 0 or greater.
Scales the horizontal glow width. Set to 0 for vertical only.

Width Y: Default: 1, Range: 0 or greater.
Scales the vertical glow width. Set to 0 for horizontal only.

Glow Darks: Check-box,  Default: off.
Enables glow darks.

Darkness: Default: 0.5, Range: 0 or greater.
The magnitude of the dark glows.

Dark Threshold: Default: 0.5, Range: 0 or greater.
Parts of the source clip that are brighter than this value get glowed. A value of 0.9 makes only the brightest spots glow. A value of 0 makes every non-black area glow.

Dark Width: Default: 0, Range: 0 or greater.
Scales the dark glow distance. Note that a zero glow width still affects the dark areas; set the darkness parameter to zero if you want to pass the Source through unchanged.

Dark Width X: Default: 1, Range: 0 or greater.
Scales the horizontal dark width. Set to 0 for vertical only.

Dark Width Y: Default: 1, Range: 0 or greater.
Scales the vertical dark width. Set to 0 for horizontal only.

Warp Chroma: Check-box,  Default: on.
Enables warp chroma.

Warp Amount: Default: 0.6, Range: 0 or greater.
Adjusts the overall amount of chroma warping of the result. The amount of warping ramps up to this value as the transition proceeds. Setting this to zero disables warping and leaves the image chroma unchanged.

Steps: Integer,  Default: 10, Range: 3 to 100.
The number of color samples along the chroma warp spectrum to include. More steps give a smoother result, but require more time to process.

Brightness: Default: 1, Range: 0 or greater.
Scales the brightness of the result.

Distortion Amount: Default: -1, Range: any.
The amplitude of the fish-eye warping.

Distort RGB Amount: Default: 0.2, Range: any.
Scales the magnitude of the lens distortion for all channels. Make negative to invert the direction of the distortions.


See Also:

DissolveBlur
DissolveBubble
DissolveDiffuse
DissolveFilm
DissolveGlow
DissolveLuma
DissolvePuddle
DissolveSpeckle
DissolveStatic
DissolveVortex
DissolveWaves
Sapphire Plug-ins Introduction

List all effects with pictures

List all effects by name

List all effects with a brief summary

General User Info
What's New In This Version
Compatibility Notes
Loading a Plug-in
Color Management with OpenColorIO
Loading and Saving Presets
Designing Lens Flares and Glares
Using the Sapphire Effect Builder
Using Mocha in Sapphire
Resetting Parameters to Defaults
Online Documentation
About GPU Acceleration
About Motion Blur
About Matte Inputs
About Alpha Processing
About Angle Parameters
About Pixel Aspect Ratios
Customizing Plug-ins
Known Problems
3rd Party Licenses

Glow Effects
Glow
GlowAura
GlowDarks
GlowDist
GlowEdges
GlowNoise
GlowOrthicon
GlowRainbow
GlowRings
UltraGlow
ZGlow
Light Beams
Rays
EdgeRays
Streaks

LensFlares
LensFlare
LensFlareAutoTrack
LightLeak
Glints & Glares
Glint
GlintRainbow
Glare

Other Lighting
BokehLights
DropShadow
Flashbulbs
Light3D
SpotLight

AutoPaint & HalfTone
AutoPaint
Sketch
Etching
Brush:Oil
Brush:Chalk
Crosshatch
Cartoon
CartoonPaint
Posterize
HalfTone
HalfToneColor
HalfToneRings

Kaleidoscopes
Kaleido:Triangles
Kaleido:Squares
Kaleido:Diamonds
Kaleido:Oct
KaleidoPolar
KaleidoRadial
FlysEyeCircles
FlysEyeHex
FlysEyeRect
TileScramble
Film Effects & Grain
FilmEffect
FilmDamage
Vignette
BleachBypass
Grain
GrainStatic
UltraGrain
Diffuse
VintageColor2Strip
VintageColor3Strip

Edge Effects
EdgeDetect
EdgeDetectDouble
EdgesInDirection
EdgeColorize

Embossing
Emboss
EmbossShiny
EmbossDistort
EmbossGlass
Other Stylize
BandPass
ColorFuse
DogVision
DigitalDamage
JpegDamage
TVDamage
Grunge
Mosaic
PixelSort
PseudoColor
PsykoBlobs
PsykoStripes
PrismLens
RomanTile
ScanLines
ScanLinesMono
Solarize
StripSlide
Zebrafy
ZebrafyColor
ZFogExponential
ZFogLinear

Adjust
ChannelSwitcher
ClampChroma
DuoTone
Gamma
Hotspots
HueSatBright
Invert
Monochrome
OCIOTransform
QuadTone
Threshold
Tint
TriTone
ShowBadColors

Composite
EdgeFlash
Layer
MathOps
MatteOps
MatteOpsComp
ZComp
Blur+Sharpen
Beauty
Blur
BlurChannels
BlurChroma
BlurDirectional
BlurMoCurves
BlurMotion
DefocusPrism
Convolve
ConvolveComp
Deband
EdgeBlur
EdgeAwareBlur
FreeLens
GrainRemove
Median
RackDefocus
RackDfComp
Sharpen
SoftFocus
ZConvolve
ZDefocus
ZBlur

Distort Effects
Distort
DistortBlur
DistortChroma
DistortRGB
Warps & Shake
InfiniteZoom
ParallaxStrips
WarpBubble
WarpBubble2
WarpChroma
WarpCornerPin
WarpDrops
WarpFishEye
WarpMagnify
WarpPerspective
WarpPolar
WarpPuddle
WarpPuff
WarpRepeat
WarpTransform
WarpVortex
WarpWaves
WarpWaves2
Shake
StretchFrameEdges

Lightning Zaps
UltraZap
Zap
ZapTo
ZapFrom

Gradients, Grid & Shape
Gradient
GradientMulti
GradientRadial
Grid
Shape

Procedural Textures
Caustics
Sparkles
SparklesColor
TextureCells
TextureChromaSpiral
TextureFlux
TextureFolded
TextureLoops
TextureMicro
TextureMoire
TextureNeurons
TextureNoiseEmboss
TextureNoisePaint
TexturePlasma
TextureSpots
TextureTiles
TextureWeave

Fractal Clouds
Clouds
CloudsColorSmooth
CloudsMultColor
CloudsPerspective
CloudsPsyko
CloudsVortex
Other Render
Aurora
LaserBeam
Luna
MuzzleFlash
NightSky
Time Effects
CutToDissolve
Feedback
FeedbackBubble
FeedbackDistort
FieldRemove
FreezeFrame
GetFrame
JitterFrames
MotionDetect
NearestColor
RandomEdits
RepairFrames
Retime
ReverseClip
ReverseEdits
TimeAverage
TimeDisplace
TimeSlice
TimeWarpRGB
Trails
TrailsDiffuse

Flicker Tools
Flicker
FlickerMatch
FlickerMatchColor
FlickerMatchMatte
FlickerMchMatteColor
FlickerRemove
FlickerRemoveColor
FlickerRemoveMatte
FlickerRmMatteColor

Effect Builder
Effect
Transition
Dissolve Transitions
Dissolve
DissolveAutoPaint
DissolveBlur
DissolveBubble
DissolveDefocus
DissolveDiffuse
DissolveDigitalDamage
DissolveDistort
DissolveEdgeRays
DissolveFilm
DissolveFlashbulbs
DissolveGlare
DissolveGlint
DissolveGlintRainbow
DissolveGlow
DissolveLensFlare
DissolveLuma
DissolvePixelSort
DissolvePuddle
DissolveRays
DissolveShake
DissolveSpeckle
DissolveStatic
DissolveTiles
DissolveUltraGlow
DissolveVortex
DissolveWaves
DissolveZap

Wipe Transitions
WipeBlobs
WipeBubble
WipeCells
WipeChecker
WipeCircle
WipeClock
WipeClouds
WipeDiffuse
WipeDots
WipeDoubleWedge
WipeFlux
WipeFourWedges
WipeLine
WipePixelate
WipeRectangle
WipeRings
WipeStar
WipeStripes
WipeTiles
WipeWedge
WipePlasma
WipePointalize
WipeWeave
WipeMoire
SwishPan
Swish3D

Other Transitions
CardFlip
FilmRoll
FlutterCut
HyperPull
HyperPush
ParallaxStripsTransition
StripSlideTransition
SwishPan
Swish3D
TVChannelChange WhipLash