Sapphire Plug-ins for AVX2: PanAndZoom

S_PanAndZoom

Loads a still image from a file and pans, zooms, or rotates it in three dimensions, while preserving the original resolution. To get started, click the Load File button and choose an image. Supported formats include JPEG, PNG, TIFF, and EXR. Then adjust the parameters such as Shift, Zoom, and Rotate to position the image, and set keyframes to create movement.

In the Sapphire Distort category.


Inputs:

Background: The current track. The clip to use as background. The output of the effect is composited over this clip.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Load File: Push-button .
Loads an image file. This file will be read from its original location and cached in your project. If you move or modify the file, or move your project to a different machine, the cached image stays in the project until another image is loaded. Click the Get File Info button to display a dialog box with image file details and cached properties. Click the Reload File button to re-read the original image file in case it has been modified on disk.

Bypass Disk Cache: Check-box,  Default: off.
Bypass saving the cached image in the project. When bypassing the disk cache, the image file must be available for reading from its original location every time the project is opened

Notifications: Check-box,  Default: on.
Turns on or off whether a dialog box appears at render upon detecting a change to the original image file.

Mocha Point Tracks: Default: 0, Range: 0 or greater.
Brings up the Mocha window for tracking points such as Shift and Vignette Center.

Anchor Point: X & Y,   Default: [0 0], Range: any.
Use this point to pan the image instead of shift if you want to always zoom or rotate about the center of the project.

Zoom: Default: 1, Range: 0.01 or greater.
Zooms in or out on the image. Values less than 1.0 move it farther away and make it smaller. Values greater than 1.0 move the image closer and enlarge it. This parameter can be adjusted using the Shift Widget.

Shift: X & Y,   Default: [0 0], Range: any.
Translates the source image. This parameter can be adjusted using the Shift Widget.

Shift Uses Mocha: Check-box,  Default: off.
Controls whether the image shift is controlled by the Shift parameter or follows the Shift tracked inside of Mocha.

Smooth Shift Track: Integer,  Default: 0, Range: 0 or greater.
Controls how many points to average when stabilizing the Mocha point track.

Scale: X & Y,   Default: [1 1], Range: any.
Adjusts the horizontal and vertical scale of the image independently. Use this to stretch the image or change its aspect ratio. This parameter can be adjusted using the Shift Widget.

Rotate: Default: 0, Range: any.
Rotates the source image by the specified angle in counter-clockwise degrees.

Swivel: Default: 0, Range: any.
Rotates the image left or right in 3D about the vertical axis.

Tilt: Default: 0, Range: any.
Rotates the image up or down in 3D about the horizontal axis. You can use Swivel and Tilt together to rotate about arbitrary diagonal axes.

Perspective Amount: Default: 1, Range: 0.25 to 4.
Controls the amount of lens telescoping while applying Swivel and Tilt. Increase for more 3D perspective.

Shear: X & Y,   Default: [0 0], Range: any.
Shears the source image horizontally or vertically.

Gamma: Default: 1, Range: 0.1 or greater.
Values greater than 1.0 make the mid-tones brighter, values less than 1.0 make them darker, 1.0 leaves the input unchanged.

Scale Lights: Default: 1, Range: 0 or greater.
Scales the result by this value. Increase for a brighter result.

Offset Darks: Default: 0, Range: any.
Adds this gray value to the darker regions of the result. This can be negative to increase contrast.

Combine: Popup menu,  Default: Foreground Only .
Determines how the image is combined with the background.
Over: The image is composited over the background.
Foreground Only: The background is ignored and only the image is shown.

Wrap: X & Y,  Popup menu,  Default: [ No No ].
Determines the method for accessing outside the borders of the source image.
No: gives black beyond the borders.
Tile: repeats a copy of the image.
Reflect: repeats a mirrored copy. Edges are often less visible with this method.

Filter: Check-box,  Default: on.
If enabled, the image is adaptively filtered when it is resampled. This gives a better quality result when parts of the image are warped smaller.

Crop Left: Default: 0, Range: 0 to 100.
Crops the left side of the input image.

Crop Right: Default: 100, Range: 0 to 100.
Crops the right side of the input image.

Crop Top: Default: 0, Range: 0 to 100.
Crops the top of the input image.

Crop Bottom: Default: 100, Range: 0 to 100.
Crops the bottom of the input image.

Vignette Parameters:

Vignette Link To Image: Check-box,  Default: off.
Animates the vignette to follow the pan and zoom of the image. When enabled, this overrides the Vignette Center parameter.

Vignette Darkness: Default: 0, Range: 0 to 1.
Vignetting is darkening of the image towards the corners and sides of the image. This parameter controls how much the outer corners of the screen should be darkened (vignetted). 0 gives no vignetting, 1 gives maximum darkening.

Vignette Radius: Default: 0.5, Range: 0 or greater.
Distance from the center where the vignetting starts. This parameter can be adjusted using the Vignette Radius Widget.

Vignette Rel Width: Default: 1, Range: 0.1 or greater.
The relative horizontal size of the vignette shape. Increase for a wider shape, decrease for a taller one.

Vignette Rel Height: Default: 1, Range: 0.1 or greater.
The relative vertical size of the vignette shape. Increase for a taller shape, decrease for a wider one.

Vignette Angle: Default: 0, Range: any.
Rotation in degrees of the vignette shape. Note that rotation will have no effect if Squareness is zero, and Rel Width and Rel Height are equal. This parameter can be adjusted using the Vignette Angle Widget.

Vignette Center: X & Y,   Default: [0 0], Range: any.
Adjusts the center of the vignette shape.

Center Uses Mocha: Check-box,  Default: off.
Controls whether the vignette center is controlled by the Vignette Center parameter or follows the Vignette Center tracked inside of Mocha.

Smooth Center Track: Integer,  Default: 0, Range: 0 or greater.
Controls how many points to average when stabilizing the Mocha point track.

Vignette Edge Softness: Default: 0.5, Range: 0 or greater.
The width of the vignette's soft edge. Larger values give softer, less visible edges.

Vignette Color: Default rgb: [0 0 0].
The color of the vignette.

Vignette Combine: Popup menu,  Default: Composite .
Determines how the vignette is combined with the Source.
Composite: composites the vignette over the source clip.
Mult: the vignette color is multiplied by the source clip. If the Color is not black, this will selectively colorize the vignette area.
Add: the vignette color is added to the source clip. This will have no effect if the vignette color is black.
Screen: the vignette color is combined with the source clip using a screen operation. This will have no effect if the vignette color is black.
Subtract Inv: the inverse of the vignette color is subtracted from the source clip. Inverse means white for black, yellow for blue, and so on. This mode looks similar to Mult, but a bit more severe; it crushes the blacks and leaves the highlights more. This will have no effect if the vignette color is white.
Vignette Only: shows the vignette pattern without the source clip. The output will be white where the amount of vignetting is greatest (e.g. where the source clip would be darkened completely).
Vignette Only Inv: shows the inverted vignette pattern without the source clip. The output will be white where there is no vignetting (e.g. where the source clip would not be darkened at all).

Vignette Smooth Curve: Default: 0.4, Range: 0 to 1.
If zero, a linear gradient is used across the screen in the soft edge area. Increase this value to use a smoother 'S' shaped curve for interpolation which can reduce the visual perception of the gradient's start and end locations.

Vignette Source Brightness: Default: 1, Range: 0 or greater.
Scales the brightness of the source clip. To see only the vignette, set this to zero.

Vignette Squareness: Default: 0, Range: 0 to 1.
Determines how square the vignette shape is. Set to 1.0 for a square or rectangle shape. Set to 0 for a circle or ellipse. Values in between give rectangles with rounded corners by varying amounts.

Vignette Blur Amount: Default: 0, Range: 0 or greater.
Blurs the borders of the image in addition to darkening them.

Vignette Blur Inside: Check-box,  Default: off.
If checked, the center (undarkened) area of the image is blurred instead of the border.

Drop Shadow Parameters:

Shadow Opacity: Default: 0, Range: 0 or greater.
The opacity of the drop shadow. Use values near 0 for subtle transparent shadows, or values near 1.0 for stronger shadows.

Shadow Shift: X & Y,  Default: screen lower right.
The horizontal and vertical offset of the shadow.

Color: Default rgb: [0 0 0].
Scales the color of the result. For example, if it is yellow [1 1 0], the blue of the result will be 0.

Blur Shadow: Default: 0.1, Range: 0 or greater.
Determines the softness of the shadow.
See general info for: Motion Blur , Resolution , Clamp Output To Legal , Bypass Effect , and Reset .


See Also:

WarpTransform
WarpVortex
WarpPerspective
WarpWaves
WarpWaves2
WarpPuddle
WarpBubble
WarpBubble2
WarpFishEye
WarpMagnify
WarpPolar
WarpRepeat
WarpChroma
WarpToRect
WarpCornerPin
Shake
Sapphire Plug-ins Introduction

List all effects with pictures

List all effects by name

List all effects with a brief summary

General User Info
What's New In This Version
Compatibility Notes
Loading a Plug-in
Color Management with OpenColorIO
Loading and Saving Presets
Designing Lens Flares and Glares
Using the Sapphire Effect Builder
Using Mocha in Sapphire
Resetting Parameters to Defaults
Online Documentation
About GPU Acceleration
About Motion Blur
About Matte Inputs
About Alpha Processing
About Angle Parameters
About Pixel Aspect Ratios
Customizing Plug-ins
Known Problems
3rd Party Licenses

Glow Effects
Glow
GlowAura
GlowDarks
GlowDist
GlowEdges
GlowNoise
GlowOrthicon
GlowRainbow
GlowRings
UltraGlow
ZGlow
Light Beams
Rays
EdgeRays
Streaks

LensFlares
LensFlare
LensFlareAutoTrack
LightLeak
Glints & Glares
Glint
GlintRainbow
Glare

Other Lighting
BokehLights
DropShadow
Flashbulbs
Light3D
SpotLight

AutoPaint & HalfTone
AutoPaint
Sketch
Etching
Brush:Oil
Brush:Chalk
Crosshatch
Cartoon
CartoonPaint
Posterize
HalfTone
HalfToneColor
HalfToneRings

Kaleidoscopes
Kaleido:Triangles
Kaleido:Squares
Kaleido:Diamonds
Kaleido:Oct
KaleidoPolar
KaleidoRadial
FlysEyeCircles
FlysEyeHex
FlysEyeRect
TileScramble
Film Effects & Grain
FilmEffect
FilmDamage
Vignette
BleachBypass
Grain
GrainStatic
UltraGrain
Diffuse
VintageColor2Strip
VintageColor3Strip

Edge Effects
EdgeDetect
EdgeDetectDouble
EdgesInDirection
EdgeColorize

Embossing
Emboss
EmbossShiny
EmbossDistort
EmbossGlass
Other Stylize
BandPass
ColorFuse
DogVision
DigitalDamage
JpegDamage
TVDamage
Grunge
Mosaic
PixelSort
PseudoColor
PsykoBlobs
PsykoStripes
PrismLens
RomanTile
ScanLines
ScanLinesMono
Solarize
StripSlide
Zebrafy
ZebrafyColor
ZFogExponential
ZFogLinear

Adjust
ChannelSwitcher
ClampChroma
DuoTone
Gamma
Hotspots
HueSatBright
Invert
Monochrome
OCIOTransform
QuadTone
Threshold
Tint
TriTone
ShowBadColors

Composite
EdgeFlash
Layer
MathOps
MatteOps
MatteOpsComp
ZComp
Blur+Sharpen
Beauty
Blur
BlurChannels
BlurChroma
BlurDirectional
BlurMoCurves
BlurMotion
DefocusPrism
Convolve
ConvolveComp
Deband
EdgeBlur
EdgeAwareBlur
FreeLens
GrainRemove
Median
RackDefocus
RackDfComp
Sharpen
SoftFocus
ZConvolve
ZDefocus
ZBlur

Distort Effects
Distort
DistortBlur
DistortChroma
DistortRGB
Warps & Shake
InfiniteZoom
ParallaxStrips
WarpBubble
WarpBubble2
WarpChroma
WarpCornerPin
WarpDrops
WarpFishEye
WarpMagnify
WarpPerspective
WarpPolar
WarpPuddle
WarpPuff
WarpRepeat
WarpTransform
WarpVortex
WarpWaves
WarpWaves2
Shake
StretchFrameEdges

Lightning Zaps
UltraZap
Zap
ZapTo
ZapFrom

Gradients, Grid & Shape
Gradient
GradientMulti
GradientRadial
Grid
Shape

Procedural Textures
Caustics
Sparkles
SparklesColor
TextureCells
TextureChromaSpiral
TextureFlux
TextureFolded
TextureLoops
TextureMicro
TextureMoire
TextureNeurons
TextureNoiseEmboss
TextureNoisePaint
TexturePlasma
TextureSpots
TextureTiles
TextureWeave

Fractal Clouds
Clouds
CloudsColorSmooth
CloudsMultColor
CloudsPerspective
CloudsPsyko
CloudsVortex
Other Render
Aurora
LaserBeam
Luna
MuzzleFlash
NightSky
Time Effects
CutToDissolve
Feedback
FeedbackBubble
FeedbackDistort
FieldRemove
FreezeFrame
GetFrame
JitterFrames
MotionDetect
NearestColor
RandomEdits
RepairFrames
Retime
ReverseClip
ReverseEdits
TimeAverage
TimeDisplace
TimeSlice
TimeWarpRGB
Trails
TrailsDiffuse

Flicker Tools
Flicker
FlickerMatch
FlickerMatchColor
FlickerMatchMatte
FlickerMchMatteColor
FlickerRemove
FlickerRemoveColor
FlickerRemoveMatte
FlickerRmMatteColor

Effect Builder
Effect
Transition
Dissolve Transitions
Dissolve
DissolveAutoPaint
DissolveBlur
DissolveBubble
DissolveDefocus
DissolveDiffuse
DissolveDigitalDamage
DissolveDistort
DissolveEdgeRays
DissolveFilm
DissolveFlashbulbs
DissolveGlare
DissolveGlint
DissolveGlintRainbow
DissolveGlow
DissolveLensFlare
DissolveLuma
DissolvePixelSort
DissolvePuddle
DissolveRays
DissolveShake
DissolveSpeckle
DissolveStatic
DissolveTiles
DissolveUltraGlow
DissolveVortex
DissolveWaves
DissolveZap

Wipe Transitions
WipeBlobs
WipeBubble
WipeCells
WipeChecker
WipeCircle
WipeClock
WipeClouds
WipeDiffuse
WipeDots
WipeDoubleWedge
WipeFlux
WipeFourWedges
WipeLine
WipePixelate
WipeRectangle
WipeRings
WipeStar
WipeStripes
WipeTiles
WipeWedge
WipePlasma
WipePointalize
WipeWeave
WipeMoire
SwishPan
Swish3D

Other Transitions
CardFlip
FilmRoll
FlutterCut
HyperPull
HyperPush
ParallaxStripsTransition
StripSlideTransition
SwishPan
Swish3D
TVChannelChange WhipLash